dazzer
Lurker
Joined: August 2019
Posts: 1
Location:
|
Post by dazzer on Aug 13, 2019 11:51:48 GMT
Hi folks after some help have a model 1 saturn with all the electronics in the bottom half of the case nothing in the lid. It's a pal system. It boots up fine and the laser head raises up slightly when it's turned on but the laser doesn't emit a light and doesn't move outwards if i manually move it out and then turn it on it moves to the middle but then stays there. the message on screen says checking disc but then nothing can anyone help me out
|
|