sych
"Living for the fantasy" -NIGHTS INTO DREAMS- The Classic Saturn Gem!!!
Joined: July 2009
Posts: 2,660
Location:
|
Post by sych on Oct 22, 2016 9:58:32 GMT
I have a small issue with my black Hori Fighting Commander controller. When fully plugged in the pad is completely unresponsive but when plugged half way in the pad seems to work fine. I don't understand this at all. It's incredibly frustrating during gameplay as the pad is only half way plugged, sometimes the connection becomes loose due to movement. This is my favourire 3Rd party controller, I would just buy another one but as I bought it second hand like this I have no idea if all Black HorI Fighting Commander pads have the same glitch. Any ideas how to fix this issue?
|
|
antime
Saturn Player
Joined: February 2013
Posts: 86
Location:
|
Post by antime on Oct 22, 2016 11:46:55 GMT
Broken/bent connector.
|
|
sych
"Living for the fantasy" -NIGHTS INTO DREAMS- The Classic Saturn Gem!!!
Joined: July 2009
Posts: 2,660
Location:
|
Post by sych on Oct 22, 2016 22:57:57 GMT
Okay but is there a way to fix it? |
|
|
|
Post by linkt101 on Oct 23, 2016 1:52:54 GMT
You're going to have to open up the controller, if you can't figure out the problem based on that then you're going to have to provide us with some good screenshots.
|
|
sych
"Living for the fantasy" -NIGHTS INTO DREAMS- The Classic Saturn Gem!!!
Joined: July 2009
Posts: 2,660
Location:
|
Post by sych on Oct 24, 2016 20:09:14 GMT
I don't think the screenshots will do much good unless I open it up which I'll try do this week. Thanks for the input.
|
|
|
|
Post by zyrobs on Oct 24, 2016 20:49:22 GMT
Scrape the dirt off the metal contacts inside the connector, they prevent contact unless the connector is in some specific position. It's what I did to fix a pad that was sold as broken.
|
|
sych
"Living for the fantasy" -NIGHTS INTO DREAMS- The Classic Saturn Gem!!!
Joined: July 2009
Posts: 2,660
Location:
|
Post by sych on Oct 24, 2016 21:03:44 GMT
Scrape the dirt off the metal contacts inside the connector, they prevent contact unless the connector is in some specific position. It's what I did to fix a pad that was sold as broken. Much appreciated Zyrobs, I'll try that as well.  |
|
|
|
Post by lanhilb89 on Nov 10, 2016 21:06:49 GMT
I just bought one asked in other post but is it like a Neogeo arcade stick? Only other one i have is the eclipse and that's stiff and very hard to work with. Also how is the ASCII stick that looks good but who knows if anyone has it. Good luck with your fix sych hopefully it's not a common problem.
|
|
