nonosto
Newbie
Joined: November 2017
Posts: 18
Location:
|
Post by nonosto on Nov 21, 2017 6:11:15 GMT
Hello world
I would like make a new efficeint power supply for my Saturn with Pico PSU. Rhea/Phoebe inside. But there is 9V. Can I dont use it like 12 V on Dreamcast with GDEMU/USBGDROM? Why we use 9V?
THX
|
|
|
Post by zyrobs on Nov 24, 2017 3:46:11 GMT
It depends on model. The later model 2s with single boards only use 9/12V in the AV out for the SCART power.
The earlier units use it at least for the CD drive (which Rhea doesn't need...), and of course the AV out. I'm not sure where else. I seem to recall the memory using it, but I think that was the 3.3V line not the 9V one. You'd need to check the schematics for this.
I'd just put a 7809 in there for that line.
|
|
nonosto
Newbie
Joined: November 2017
Posts: 18
Location:
|
Post by nonosto on Dec 12, 2017 19:31:28 GMT
THX. It's seems 9V needed for RGB output. 5V for Rhea/drive and I assume the 3.3V for the motherboard. I use the first version double LED Saturn (or V saturn).
|
|