|
Post by andrewds on Nov 8, 2010 5:44:35 GMT
Hi everyone, just thought a thread like this could be useful for people to submit links (or create their own) for installing a 50/60hz switch. I used this tutorial djoen.dommel.be/Console/saturn/saturn-model2.htmlWhich I chose because it doesn't involve lifting pin 79 on the VDP chip, just soldering to 5V and Ground and then cutting a track and then another solder to point TP103, and thats it works fine for me and just thought I'd share it =)
|
|
mick_aka
Kickin' it lively!
"Mick is moderately adequate."
Joined: April 2007
Posts: 9,817
Location:
XBL: mickloaf
PSN: mickloaf
Nintendo ID: segamick
|
Post by mick_aka on Nov 8, 2010 9:50:29 GMT
|
|
|
Post by andrewds on Nov 8, 2010 10:23:54 GMT
|
|
|
Post by zyrobs on Nov 11, 2010 21:03:09 GMT
I wouldn't dare rising a pin out of any chip on any console (yet), but connecting sw3-4 next to the battery worked perfect on both of my saturns. (mainboard models: 171-7131A 837-12135 and 171-6963B 837-11493)
Only tried using composite video so far though, I've heard someone claiming that this mod breaks RGB on a 837-12135. I'll check that once my rgb cable arrives.
|
|
|
Post by andrewds on Nov 11, 2010 22:17:46 GMT
I was going to use the SW4 mod but unfortunately my motherboard doesn't have those pins =(
|
|