duke2k7
Newbie
Joined: September 2021
Posts: 8
Location:
|
Post by duke2k7 on Sept 12, 2021 0:32:38 GMT
Hey guys, Just took the psu outta my JPN model 2, but nowhere can I see whether this is 3.3 or 5 volts. The DragonCity psu I have installed has two power options. Can anyone say for sure what voltage to set the psu to? I’ve checked online on a lot of pages but the only info I can glean is the capacitor list for the psu and not it’s voltage I guess I could leave it at 3.3 and see if it works, if not then I know it’s 5v, but I thought some of you might know before I do something stoopid lol Thanks
|
|
|
Post by zyrobs on Sept 12, 2021 1:57:54 GMT
Yamaha XR258 (Model: 35M07U) is type B according to my notes, pinout is GND GND 3.3V 5V 9V on all such PSUs.
When in doubt, check it with a multimeter.
|
|
duke2k7
Newbie
Joined: September 2021
Posts: 8
Location:
|
Post by duke2k7 on Sept 12, 2021 13:46:20 GMT
Yamaha XR258 (Model: 35M07U) is type B according to my notes, pinout is GND GND 3.3V 5V 9V on all such PSUs. When in doubt, check it with a multimeter. Normally, the multimeter is the first thing out but we've recently moved and have no idea where it is lol! So on the pico replacement, there is a switch that basically offers 3.3 or 5 volts. I'll try 3.3 and see what occurs as that was my original query, but those pinouts are mega useful, thanks!
|
|